Jandy / Compool / Pentair Pool Valve Spacer Ring
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pool valve spacer ring that goes between two rubber O-rings on shaft
- Ocena
- 5 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 1
- Wyświetlenia
- 43
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
Some of the older Jandy / Compool pool valves have a little plastic spacer ring between the two rubber o-rings on the shaft. Newer ones don't have the plastic spacer, they just have two o-rings next to each other.
I owned an older valve and this plastic spacer had broken. I printed a few different sizes and this one seemed to fit ok. You could scale in the slicer if needed though.
I recommend printing in ASA or something more chemical resistant than ABS or PLA. Supposedly ASA is good for this, so I'm using that but only time will tell.