Joroto X2 Exercise Bike Bottle Cage Mount

The Joroto X2 and X2Pro come with a bottle cage to attach to the forks, but it's a pretty long reach from the seat. I modeled up a sleeve that will fit over either the seat post or handlebar post - both are the same size hex tubing. The notch is to clear the insertion stop on front of the handlebar post.  Designed for use with 2x M5x10x7mm threaded inserts for the bottle cage screws, but you can use shorter ones, if that's all you have.  Currently set up to mount the cage to the rear of the handlebar post, because that seemed like the best placement, but I may upload more files later for placing the bottle cage on the side of the handlebar post.

The seatpost on my X2 doesn't have a stop, so you could put the cage in any orientation you think is best. If you are going to put the bottle cage on the seat post, you may want to use a side-entry cage instead of the one that comes with the Joroto bikes.

10mm test piece included, so you can check for fit without printing the whole bottle cage mount. By scaling the Z dimension, or printing multiple 10mm spacers, you can place the cage exactly where you want it vertically, and the cage won't slide up as you try to remove the bottle.