Replacement Water Reservoir – Compatible with Cigar Oasis Excel 3.0
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Humidifier tank compatible with but not affiliated with Cigar Oasis Excel 3.0
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 46
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I love my Cigar Oasis humidifier, but it didn’t fit well in my desktop humidor due to the size of the water tank. I designed this smaller, half-capacity replacement tank so I could use my personally owned unit in a compact humidor. I also designed a full-size alternative tank that allows me to use humidity beads instead of a sponge-based solution. These are independently designed aftermarket parts and are not affiliated with or endorsed by Cigar Oasis.
Print Settings and instructions
Supports
Make sure to exclude the underside of the top of the tank (as pictured)
Enabled, Normal, top z distance 0.3
Wall Loops
3
Once there is a single layer in the bottom of the holes that allows it to print without support in the tank. I used a razor blade and cut out the circles for air flow. Fill with your favorite humidification beads, I used glycol crystals.