SONOFF SNZB-02WD Desktop Stand Remix

This is a remix of the SONOFF SNZB-02WD Temperature Sensor Desktop Stand posted by SONOFF on MakerWorld. This stand is designed to hold the SONOFF SNZB-02WD Smart Temperature and Humidity Sensor at an optimal viewing angle when placed on a desk, shelf, or tabletop without interfering with the sensor's ability to collect temperature and humidity data.

Print Settings

This stand should be properly oriented & is designed to be printed without supports. I used a 0.2mm layer height with 40% infill, but you can experiment with other layer heights and infill densities if you’d like. Depending on where your stand will be used, it may be best to print with a heat-resistant filament such as ABS, ASA, or PETG. You may need to scale your print for optimum sensor fitment based on your filament selection.

Value4Value

This design is being released under the Value4Value model. If you received any value from my work, please determine what it was worth to you & return that value to me in the form of a donation. Thank you for supporting my work!

Print Info

Printer: VORON 2.4 350
Rafts: No
Supports: No
Resolution: 0.2 mm
Infill: 40%
Filament: Keene Village Plastics - Green Lemon-Lime PLA

Changelog

Changes made to the original design:
• All original chamfers were replaced by fillets for a smooth, more continuous design aesthetic
• Sensor access hole was filleted to match the rest of the stand's aesthetic
• A "chamfillet" was created along the bottom edge of the print for better print results
• Corners of the bottom sensor cutout were filleted to match the front bottom edge of the stand
• Front face of the bottom sensor cutout was filleted to match the rest of the stand's aesthetic
• The rear of the sensor cavity was contoured to the back face of the sensor to prevent sensor movement while in the stand
• Tolerances were tightened around the sensor opening to prevent the sensor from falling out of the stand when moved, bumped, etc.
• A “maker's mark” was added to the sensor cavity that will be obscured by the sensor when in the stand

“If I have seen further, it is by standing on the shoulders of Giants.” — Isaac Newton

This stand was remixed from the original SONOFF SNZB-02WD Temperature Sensor Desktop Stand by SONOFF using Fusion 360. Just as it was originally provided to me, I have included the .step file for my remix, should you want to make additional changes to my design. If you might find it useful for future designs, I have also reuploaded a full-size dummy model of the SONOFF SNZB-02WD Smart Temperature and Humidity Sensor, as was originally uploaded by SONOFF on MakerWorld.