Cross-country ski holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A cross-country ski holder to strap a pair of cross-country skis side by side.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 248
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A cross-country ski holder to strap a pair of cross-country skis side by side.
A pair of cross-country skis, cannot be easily straped side by side with simple Skifix straps, even so, this is the most space saving way to store them.
This simple device keeps them from sliding out of position.
Two pieces are recommended for one pair of skis.
Additionaly required: Ski straps / Skifix up to 25mm wide. Model can be scaled in the slicer to fit wider ones.
Printing:
Printed in PLA, placed on the flat side with supports in the duct. Supports are tricky to remove, may be printing it sideways may spare the supports.