Stackable Spacers / Shims for Leveling and Mounting
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stackable 3D-printable spacers for leveling and spacing. Studs allow stacking or can be removed for flat use.
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 74
- Wydruki
- 1
- Wyświetlenia
- 189
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
These spacers are 60mm x 25mm and designed for easy and precise height and distance adjustment between two surfaces. They can be used for tasks like leveling a tabletop, raising cabinets, or creating a consistent gap between components.
The key feature of this design is the built-in studs on top, which allow the spacers to be stacked securely. This makes it easy to fine-tune the height by combining multiple spacers, without needing many different thicknesses.
If stacking is not required, the studs can simply be cut or sanded off, turning the part into a completely flat, traditional shim.
Use cases
Leveling tabletops and work surfaces
Raising and adjusting cabinets or furniture
Creating consistent spacing between parts
Temporary or permanent mounting solutions
Features
Stackable design for precise height adjustment
Simple and sturdy geometry
Flexible use: with or without studs
Easy to 3D print and customize
This design focuses on practical, everyday use—both at home and in the workshop. If you’re looking for a simple, reusable, and flexible spacer solution, these stackable shims should be a great fit.
Enjoy, and feel free to share feedback or improvements! 🚀