HinksPix Smart Long Range Receiver
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple to print, print face down. This PSU Mount is designed to fit the standard hole dimensions for PSU (verified on…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 245
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
Simple to print, print face down.
This PSU Mount is designed to fit the standard hole dimensions for PSU (verified on Alitove and Meanwell).
The design has a in-cut on the bottom to allow for nuts/bolts to rest above the PSU. Design only uses top screw holes on the PSU to allow the bottom to be used for PSU mounting.
Mounting Hardware:
2x - M4 - 8mm bolts (secure mount to PSU)
4x - M3 - 12mm bolts/nuts (secure controller to mount)
Print Settings
Notes:
Print Settings
Nozzle: .4mm (.6mm or larger will work too)
Layer Height: .32mm
Perimeters: 3
Solid Layers: 4 top/bottom
Infill: 10%
Speed: Standard, but slower is better for the support brackets
Category: Electronics