Motorcycle Chain Slack Gauge for Certain Beta Models
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A motorcycle chain slack gauge for certain Beta models, including the 350RR and X-Trainer (and likely more).
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 91
- Wydruki
- 0
- Wyświetlenia
- 363
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a motorcycle chain slack gauge for certain Beta models, including the 350RR, X-Trainer and more, modeled after Beta's own tool at https://betausa.com/ab-15008.html. I strongly recommend getting on of theirs, which is made of something like cast Delryn/POM, and then print one of these as a backup.
As this is a basic-shape, reverse-engineered tool to help with Beta maintenance, YOU MUST NOT SELL PRINTED COPIES, lest you invite Beta's lawyers to your door. In fact, if Beta asks me to take this model down, I will gladly do so, since I'm a big fan of the company and their bikes and have no intentions of interfering with their IP or sales. This is simply provided to others to help keep these awesome bikes in top shape.
With that said, I suggest PCTG, ABS, ASA or PETG as the filament. You can go light with the infill as well - no need to make this heavy; I used 15% gyroid infill on mine.
P.S. This rendition fits Beta's swingarm notch better than the included picture of an early prototype suggests, but if you want ultra-accuracy, get Beta's official one! :-)