LayersFactory
Zgłoś model
1 / 4
Levoit LVAC-200 Vacuum, 1- or 2-Tool Holder — zdjęcie 1
1 / 4

Levoit LVAC-200 Vacuum, 1- or 2-Tool Holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

lopsidedflan

lopsidedflan

@lopsidedflan_2961431

Accessories tool holder mounted to the vacuum that can hold one or both of the provided tools on the sides of the vacuum

Ocena
0 / 5
Polubienia
5
Pobrania
30
Wydruki
0
Wyświetlenia
212
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other House Equipment
Licencja
Creative Commons — Attribution — Share Alike
SzczegółyPliki (8)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (6)Powiązane

@PrusaFan123's model fit fine, but it only allows 1 tool to be attached. In addition, the tool attaches to the back of the vacuum, which prevents me from laying the vacuum horizontal to the ground. I tend to vacuum under beds, couches, and shelves, and I need to lay the vacuum as flat as possible.

I created a remix that allows you to attach 1 or both provided tools, and the tools are attached to the sides of the vacuum. Variations include:

  • A version where the holder is mounted to the upper portion of the vacuum tube (seen in pictures).

  • A version where the holder is mounted to the lower portion of the vacuum tube.

I used M2.5x10mm socket head cap screws. The 2-tool-holder uses 8 screws while the 1-tool-holder uses 6 screws. You can get a set like this: https://www.amazon.com/dp/B0DCKG5BLG

The following are the correct files to print for the version you need:

  • Holds 2 tools, mounts to UPPER portion of the vacuum

    • levoit-lvac-200-TWO-tool-holder-UPPER-stick-BACK-part.stl

    • levoit-lvac-200-TWO-tool-holder-UPPER-stick-FRONT-part.stl

  • Holds 2 tools, mounts to LOWER portion of the vacuum

    • levoit-lvac-200-TWO-tool-holder-LOWER-stick-BACK-part.stl

    • levoit-lvac-200-TWO-tool-holder-LOWER-stick-FRONT-part.stl

  • Holds 1 tool, mounts to UPPER portion of the vacuum

    • levoit-lvac-200-ONE-tool-holder-UPPER-stick-BACK-part.stl

    • levoit-lvac-200-ONE-tool-holder-UPPER-stick-FRONT-part.stl

  • Holds 1 tool, mounts to LOWER portion of the vacuum

    • levoit-lvac-200-ONE-tool-holder-UPPER-stick-BACK-part.stl

    • levoit-lvac-200-ONE-tool-holder-UPPER-stick-FRONT-part.stl

Tagi

toolholdermounttoolsvacuumaccessoriesattachmentlevoitlvac200lvac