Anchor for RaspiNAS by Gno
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I added a three-pin anchor to keep the Raspizone in place. Also, supplied the assembly and .STEPs.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 61
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The raspi wasn't staying put, so thisanchor will help prevent any movement from the NAS being moved, shaked or whatever ^^
Also added a Solidworks assembly's export, so you can also test colors if you need it !
Any filament seems good.
holes diameters are 2.50 mm.
I'm putting a pretty strong force when trying to move the Pi here.
I'm thinking of a V2 to make this anchor a spacer as well, so we can put a fan on top.
29.01.26 : added a shorter version, with a different path on the long bridge (it was a personal need to make space for a 60 mm fan) :
 |  |
|---|