1 / 6
Niimbot D110 Holder for IKEA Skadis (Secure 3-Prong Mount) — zdjęcie 1
1 / 6

Niimbot D110 Holder for IKEA Skadis (Secure 3-Prong Mount)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Secure IKEA Skadis mount for Niimbot D110. Features a stable 3-prong design for zero wobble and power button access.

Ocena
0 / 5
Polubienia
2
Pobrania
11
Wydruki
1
Wyświetlenia
136
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial

This is a custom-designed holder for the Niimbot D110 label printer, made specifically for the IKEA Skadis pegboard system. It solves the common issue of loose pegboard accessories by using a reinforced mounting design.

Features

  • Solid 3-Prong Connector: Unlike standard 2-hook designs which can wobble, this model utilizes a 3-prong connector layout. This ensures the printer stays rock-solid on the board when you are inserting or removing it.

  • Snug Fit: The tolerance is designed to hold the printer securely without rattling, while still allowing for easy removal.

  • Functional Design: Includes a dedicated cutout for the power button, so you can turn the device on or check status lights without taking it off the wall.

Print Settings

  • Material: PLA is sufficient, though PETG is recommended if you need extra durability for the hooks.

  • Layer Height: 0.20mm recommended for a balance of strength and detail.

  • Perimeters/Walls: 3 walls recommended to strengthen the hooks.

  • Infill: 15-20% (Grid or Gyroid).

  • Supports: Required for the Skadis hooks on the back. Use "Touching Buildplate Only" or paint supports manually on the hooks for a clean interface.

  • Orientation: Print upright (as positioned on the wall) for the best hook strength.

Installation Slide the 3-prong mount into your Skadis board. The fit should be tight to ensure stability. Place your Niimbot D110 into the holder with the power button facing the cutout.

Tagi