Mossy Oak 17-in-1 Multitool - Bit Holding Scales
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holds Leatherman style bits on a Mossy Oak 17-in-1 G10 Multitool
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 101
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
This allows you to fit 6 Leatherman flat bits and 2 SAK scale tools in a Mossy Oak 17-in-1 G10 Multitool. This is also compatible with other tools based on the Dakoyu Triton.
This mod takes the place of the saw and file on the tool. 4 3X6mm magnets are needed. It works with Leatherman flat bits, as well as other alternatives. I used Gavanox bits for the one pictured. This can also accommodate the tweezers and toothpick from a Victoronox 58mm.
This is printed in PETG with 20% infill. I was unable to replicate the G10 texturing in my print. I included the textured model for folks that know what they're doing. Please let me know what works for you if you figure it out.