1 / 8
Tactical Dog Poop Bag Holder - Toughest Out There — zdjęcie 1
1 / 8

Tactical Dog Poop Bag Holder - Toughest Out There

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Pick up dog poop with the precision of Special Forces! Rugged design Optimized material usage Customizable & NO supports

Ocena
5 / 5
Polubienia
12
Pobrania
53
Wydruki
1
Wyświetlenia
198
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Pets
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

See new 2.0 design:

This poop bag holder is TOUGH! 💪 I used hexagon architecture to reinforce the walls and top loop strength. Flat wall surfaces make good embossed text areas too. I made a low profile screw-on lid (bottom) that has knurled grip for all-weather dog-walking operations.

I was inspired to make a design to improve upon the cheap store-bought options that broke all the time. Some 3D print models were weak at key points, like in the loops, threads, lids, especially rods in the middle. I had 2 break: 1 at the loop, 1 internal cylinder.

I made a free-floating center rod to keep the bag roll centered and not have a rod that snaps off over time. The rod was square intentionally to allow printing flat so layer lines run parallel to the length for best strength, and not round to reduce overhangs found on first layers of cylinders printed horizontal. Cheap models took shortcuts here and without a rod, the roll sometimes falls out the opening when bags run low. 

I used a clever trick to made 3D printer friendly threads: the main body has notches in the threads to prevent loose extrusions. Without this, it is common for strings of filament to float/detach during extrusion of the interior circle edges. 

Tagi