1 / 2
👽🦀 Alien REMASTERED facehugger print-in-place. Long tail and fingers.
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Articulated print-in-place facehugger with bent tail, which allows MUCH LONGER tail, longer fingers, larger body etc.
- Ocena
- 4,896 / 5
- Polubienia
- 1242
- Pobrania
- 8916
- Wydruki
- 77
- Wyświetlenia
- 26 355
- Oceny
- 67
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 77) (Komentarze: 90)Remiksy (1)Kolekcje (1441)Powiązane
Info:
- I have taken great original model from @OneIdMONstr (thanks!) and had an idea how to make bigger alien facehugger which is still fully print-in-place
- bent tail & fingers allow:
- much longer tail (tail has 41 particles, instead of 11 in original)
- so it can be wrapped around your hand/neck
- longer fingers
- larger +remodelled body
- much longer tail (tail has 41 particles, instead of 11 in original)
Print info:
- PLA, nothing special
- no support
- no brim should be needed for smooth plate, but adjust for textured plate