Injora 370 Motor & Transmission Mount (Custom RC Crawler Motor Mount)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Custom 3D-printed mount designed to securely hold an Injora 370 motor with transmission for WPL RC crawler and custom RC
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 77
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Public Domain
This is a custom-designed motor and transmission mount made specifically for the Injora 370 motor with integrated transmission.
The mount was designed for RC crawler and custom RC projects where a secure, clean mounting solution is needed. It provides proper alignment and stability for the motor/transmission assembly and is suitable for DIY chassis builds or custom conversions.
Printing Notes:
Recommended material: PLA+ or PETG (PETG preferred for durability)
Print orientation: flat on the bed
Infill: 20–40% recommended for strength
Supports: angle the part at about 30 degrees and add organic supports
Notes:
Hardware 4 stock mounting bolts/screws to the chassis rails and 4 bolts/screws from the injora transmission, no need for extras
Designed for use with WPL C14 / C24 / C44 platforms. Fitment may vary depending on chassis mods and drivetrain configuration—test fitting is recommended before final installation.
If you make improvements or adaptations, feel free to remix and share!
Extras- feel free to message about getting parts done or any questions. i am on my engineering journey so all feedback and suggestions would be greatly appreciated :)
