Timemore Nano Pommel Handle replacement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed it using tinkercad Used 25% infill with .15mm layer and my choice of filament is PETG.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 281
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
Designed it using tinkercad
Used 25% infill with .15mm layer and my choice of filament is PETG.
This is my very first design and I was really happy that it fits on the Timemore Nano, the hole's diameter is 10.3mm with a depth of 12mm to make sure that there would still be space in case the handle expands during an increase in temperature since it was a metal and also for the magnet to fit inside. I tested 8mm neodymium magnets and it still has a lot of space to wobble inside. i think using 10mm dia magnets here can fit inside the hole as well.
I also made a spherical version of this as requested by my friend. Printed in half as advised by the prusa manual with concerns with spheres. I just used a super glue and it really looks like I printed it as one! :D
The product's dimension as printed with its scale is as follows:
Original pommel:
- Height: 46mm
- Top radius: 40mm
Spherical pommel:
- Diameter: 46mm (Size of a golf ball)
If you have any questions or remixes I'll be responding to it, show your makes as well.
Have a good day everyone!