EQ5 Tripod Leg Holder for TOBWOLF DC 36W 12V 3A Power Supply Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
EQ5 tripod leg holder for TOBWOLF DC 36W 12V 3A PSU (56.1mm width and 33.5mm thickness)
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 91
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- GNU General Public License v2.0
A PSU holder for the TOBWOLF DC 36W 12V 3A PSU that attaches to the leg of an EQ5 tripod. This PSU is probably available with different brand names, TOBWOLF is the brand of the one I purchased from Amazon.
I designed an appropriate holder (in OnShape) for the size of the TOBWOLF DC 36W 12V 3A PSU with a hole in the base for the two pin mains input cable then mashed it onto a z-axis scaled up version of the Colby_Attack TripodLeg30mm model. Should also work for similar sized PSUs of 56.1mm width and 33.5mm thickness with a centered two pin mains input on the base. (PSUs much larger than these dimensions won't fit and smaller will be loose.)
I used the Colby_Attack TripodLeg30mm model for the tripod clip because it fits nice and tight with zero slippage down the tripod leg from the weight of the PSU.
Print vertically with 15% infill in PETG.
In the files are the STLs for the EQ5 leg mounted PSU holder and a separate file for just the PSU for others to remix to different mounts. I've also included the STEP file for the PSU holder so others can use this to make holders for different PSUs.