UniFi SuperLink Gateway (USL-Gateway) Magnetic Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Magnetic case for UniFi SuperLink Gateway. Features 6 10x3mm magnet inserts and front ventilation for optimal cooling.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 32
- Wydruki
- 1
- Wyświetlenia
- 165
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
Protect and mount your UniFi SuperLink Gateway with this sleek, functional, and easy-to-install enclosure. This case is designed specifically for a precision fit, ensuring your gateway stays cool while offering versatile mounting options.
Key Features
Magnetic Mounting: Features 6 integrated magnet inserts designed for 10×3 mm neodymium magnets. This allows you to securely snap the gateway onto server racks, metal cabinets, or any magnetic surface without drilling holes.
Optimized Airflow: The front panel includes custom ventilation cut-outs to prevent heat buildup, ensuring your SuperLink Gateway maintains peak performance during heavy network loads.
Precision Fit: Tailored dimensions for the USL-Gateway with easy access to all necessary ports and cables.
Low Profile Design: Adds protection without significant bulk, keeping your networking setup looking clean and organized.
Hardware Needed
Magnets: 6pcs of 10×3 mm circular magnets.
Adhesive (Optional): A drop of superglue can help secure the magnets, though the tolerances are designed for a snug press-fit.
Print Settings Recommendations
Material: PETG or ASA (Recommended for heat resistance in networking environments), though PLA works fine for most home setups.
Infill: 15–20% (Gyroid or Grid).
Perimeters: 3 for added durability around the magnet pockets.
Supports: Minimal or none (depending on your printer's bridging capabilities for the ventilation slots).
Tip: If you are using strong neodymium magnets, be sure to check the polarity before seating them in the inserts so they all pull in the same direction!