Wood Marker
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
This is a remix of this:
https://makerworld.com/en/models/1067183-wood-marker#profileId-1356784
Since this model needs support I think PLA is the best option. Supports seem to come off the best with PLA and it is plenty strong for this application. I used Snug supports "off the bed only" for all the parts except no support needed for the trigger or the wheel. I did not fill the bolt holes with support and it seemed to work fine. You can see the print orientations I used in the .3mf files. 2 walls, 15% fill, full speed input shaper.
Hardware:
4x 50mm m6bolts
5x m6 nuts
1x 80mm m6 carriage bolt and wing nut (added the extra nut as a locker)
The printed handle secures with an m8 or 5/16" bolt , 1.5" long. This bolts threads into the plastic of the main body.