Filament Winder with integrated filament brake
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stable filament winder with integrated filament brake for spools from di 49 to 59; da max. 216; with speed adjustment.
- Ocena
- 5 / 5
- Polubienia
- 21
- Pobrania
- 99
- Wydruki
- 2
- Wyświetlenia
- 1090
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I was looking for a filament spooler to transfer filament from larger spools to standard spools. During my search, I found these two projects, which inspired me to build my own spooler.
https://www.printables.com/model/466883-pastamatic-filament-spool-winder-for-bambu-lab-x1c/files
and
https://www.printables.com/model/1500320-completely-motorized-filament-respooler-contd
Thank you both very much for your great models.
But now to my spooler...
Material: PLA
Support material not necessary; part E1 has an integrated support block that can be easily broken off.
All parts except D1
- Wall thickness and upper/lower layer should be 0.6 mm. (for nozzle diameter 0.4 = 3; for nozzle diameter 0.6 = 2)
- Infill 20%
- Part D1, wall thickness and upper/lower layer should be approx. 1,8 mm (for nozzle diameter 0.4 = 4; for nozzle diameter 0.6 = 3) and Infill 30%
number of items | Description | Link |
10 | 4-square nut DIN 562-M3 | |
2 | Cylinder screw DIN 912-M3x12 | |
4 | Cylinder screw DIN 912-M3x16 | |
9 | Cylinder screw DIN 912-M3x20 | |
6 | Cylinder screw DIN 912-M4x20 | |
1 | Cylinder screw DIN 912-M4x25 | |
3 | Hexagon nut DIN 934-M3 | |
2 | Hexagon nut DIN 934-M4 | |
3 | Hexagon nut DIN 934-M8 | |
1 | Threaded rod M8x140 or M8x160 | |
2 | Deep groove ball bearing DIN 625-608ZZ | |
2 | RUTHEX threaded insert M3 | |
1 | DR25E01 DPDT relay module, two-pole DPDT double block, self-locking bistable (DC6-24V) | https://www.amazon.de/dp/B088PMBSH3?ref=ppx_yo2ov_dt_b_fed_asin_title |
1 | Cold device built-in plug Built-in socket C-14 with switch Audio cold device socket Built-in coupling incl. fuse Cold devices | https://www.amazon.de/dp/B01FQVM9EM?ref=ppx_yo2ov_dt_b_fed_asin_title |
2 | Heschen microswitch, long roller lever, changeover switch, 20 A, 250 VAC, pack of 2, V-156-1C25 | https://www.amazon.de/dp/B073LY6RN4?ref=ppx_yo2ov_dt_b_fed_asin_title |
2 | PWM DC motor speed controller 5V 9V 12V 18V 24V 30V 12A 360W Adjustable speed controller MGP motor controller | https://www.amazon.de/dp/B0B7X6Z34Z?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 |
1 | DC gear motor 12V-T5x160mm | https://www.amazon.de/dp/B08K8JJWJ9?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 |
1 | Linear guide MGN12H-150 | https://www.amazon.de/dp/B0BWTN1D24?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 |
1 | Worm gear motor 12V-200RPM-8D | https://www.amazon.de/dp/B08GFSYZ1W?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 |
1 | DIN rail transformer 100-240 V AC (50/60 Hz)-12 V DC-2.5A-30W | https://www.amazon.de/dp/B0DYF9162Z?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 |
Alignment on the printing plate:
The images are only intended to illustrate the alignment of the components on the printing plate so that everything can be printed without support material. I printed each part individually, but everyone can do what works best for them.
The parts are designed with relatively little play so that the spooler does not wobble after assembly. Depending on the print quality, it may be necessary to sand part E1 slightly with sandpaper so that it can be inserted into part F1.
A square nut is inserted into part L1 from below and a cylinder screw is screwed in from above. The hole in L1 is deliberately narrow so that the screw really clamps into it later.
wiring
More details coming soon