1 / 1
Prusa Core One L Fan Shroud (For printers made before April 2026) — zdjęcie 1

Prusa Core One L Fan Shroud (For printers made before April 2026)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A fan shroud for the Prusa Core One L exhaust fans. Prevents cables/tubes from snagging on the fans. Friction fit.

Ocena
4,9 / 5
Polubienia
57
Pobrania
195
Wydruki
10
Wyświetlenia
1502
Oceny
10

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

Please note! This was made for Core One L printers produced before April 2026! Prusa updated the design and this shroud will not fit the newer printers! If your machine was produced around that time, please check and measure before printing!

A fan shroud for the Prusa Core One L exhaust fans. It prevents cables/tubes from snagging on the fan shrouds, acting liked sloped armor to deflect the arm. It also looks nice and can add a dash of color to your printer. Form and function!

Easy to install as it uses a friction fit. Just press it on and it will stay in place. Small cutouts exist for screw holes and cables.

How is this one different than other fan shrouds uploaded here? This one:

  • Fits the Core One L - I have no idea if it will work on the Core One

  • Shrouds the entire fan assembly - rather than just a corner

  • Is compact - the goal was to make it large enough to be durable, printable, and able to deflect anything from catching regardless of the angle of approach.

  • A friction fit - no tape or glue required (magnet will not work as the back panel is aluminum)

Unless you are sure your slicer is going to accurately transform the STEP file, I recommend using the STL file. I have included the STEP file so you can decide, but keep in mind that unless something has changed in how most slicers import STEP files, the STL is likely to produce a higher quality print as this one was exported in high quality. See this post for additional information: https://www.reddit.com/r/3Dprinting/comments/1j936w1/we_need_to_talk_about_step_vs_stl_files_there_is/

Want to adjust it? Good news! I designed this in Onshape which is a free, browser based online CAD program. Here is the link to the design: https://cad.onshape.com/documents/5556f2f230d3d0774922b21b/w/0de5cbebd2b250b5f66c74e6/e/0e26baed0c08b247c5758013