Unifi G4 Instant Single Gang Box Camera Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Camera mount for the Unifi G4 Instant. Built to accommodate the USB-C to Eth adapter.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 112
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
There is no great design I found that accommodates mounting the G4 Instant to the ceiling. This design is great if you have a LV box in the ceiling to accommodate the POE adapter (if you have it) and the camera in a single base. The design is built with 40 teeth allowing you to micro adjust 360 degrees without dealing with the cable getting in the way. The mount can accommodate winding the original G4 cable around for painless management, avoiding damage to the cable.
If you do not have the UACC-Adapter-PoE-USBC, you can print just the camera base which still allows the freedom to rotate 360 degrees.
Pro Tip: print the plate at 0.10mm resolution and the mount at 0.28mm to have an exact fit... other wise, there is a .25 offset for clearance.