Gecko Run Finish (Custom glass-mounted Marble Run)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall-mounted finish bowl to catch marbles at the end of a custom Gecko Run build.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 185
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution
This is a simple finish bowl for Gecko Run setups. It is mounted directly to a smooth surface using an original Gecko Run nano-adhesive pad and serves as the endpoint of a custom track. Loose marbles are safely caught instead of falling to the floor.
The model consists of one single part. A flat area on the outside is designed to attach a standard Gecko Run adhesive pad. No additional hardware or printed adapters are required.
Material:
Works with almost any common material. PLA is recommended because it is easy to print and fully sufficient for this use case.
Post-processing:
None required. Optionally, clean the pad contact surface for best adhesion.