NCASE M2 Feet Front IO Power Button
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Feet for NCASE M2 with optional front IO and power button for the Grater. Allows access to front and back plate screws.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 386
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Designed for M2 DualC Front USB IO Kit (CNC Bracket Included)
For the Grater just print exactly what’s contained within the STL. For other versions remove the IO foot and power button backplate then duplicate the standard foot.
Use M3 threaded inserts and the standard countersunk screws that came with the case or like I did use some hex bolts to get easier access with a tiny hex key. Use any material you want, I used ASA but PLA will be fine.
These feet unlike most other designs allows access to the front and back plate screws so disassembly is not required to take the case apart.
The cables are a bit fiddly to get in but if you fold the USB C cable to the right as pictured then it tucks in quite nicely.