1 / 2
X-Carve 1000 x1000 Drag Chain 2020 bracket — zdjęcie 1
1 / 2

X-Carve 1000 x1000 Drag Chain 2020 bracket

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

One of my 2020 Drag Chain brackets broke and Inventables no longer supports the 1000X1000 non-Pro machines, so I made it

Ocena
0 / 5
Polubienia
0
Pobrania
4
Wydruki
0
Wyświetlenia
40
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Share Alike

The 2020 extrusion that holds the drag chain on my non-Pro model X-Carve 1000X1000 was loose...it was a broken bracket.  Inventables no longer supports these machines and I was unable to locate a replacement, so I had to design and make one.

I printed with PETG-CF.  I stood it on the large end standing straight up with brim and full supports.  It was no problem with the XL Pro to print, as it isn't a table slinger.

Everything seemed to line up great, and the 2020 extrusion is supported back where it needs to to carry the weight of the drag chain.

Tagi