Minimal case for Amazon Gaiatop Mini Space Heater
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Minimal case for Amazon Gaiatop Mini Space Heater to make it fit Elegoo Centauri Carbon
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 81
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Take the guts out complete with the control from the heater.
Cut the wires from the tip over switch and connect the wires together.
Cut the plastic support surrounding the heater coil on three sides(bottom, left, right)
Put the guts in the case, starting from the front of the new case, put in the controls first and then postion the heater part in. Tight fit but should fit with a few wiggles. Screw the control to the lid and put the lid on the heater body using the screws from the original heater.
Heater does have a thermal switch that cuts the heat off at 60C and turns it back on at 53-54C. I have it connected to a temperature controlled outlet for double the safety. Keeps the Centauri carbon at 54-60 no problem in my cold room with the chamber fan on for exhaust.