Socket trays: Craftsman 1/2" drive SAE
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Trays in several layouts for Craftsman 1/2" drive SAE sockets.
- Ocena
- 5 / 5
- Polubienia
- 119
- Pobrania
- 596
- Wydruki
- 1
- Wyświetlenia
- 2559
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
This is part of a mega-project to create a comprehensive set of socket organizer trays. Specifics for this print:
Manufacturer: Craftsman
Drive size: ½"
Size units: SAE
Notations for layout type:
FW = fixed width (arrange tray segments vertically)
VW = variable width (arrange tray segments horizontally)
NL = no lettering
WL = with lettering
The OnShape CAD is here: https://cad.onshape.com/documents/2bbe0c163ddc347efd6b4d3f/w/eae67d546012922cc1ffda76/e/4837165c753cd6d330c36ea1
This OnShape project is used to define all of the socket trays in this group of prints. The link above may not point to the specific manufacturer/drive/units in this print. If you explore the project the folder structure will be evident.
A lot of FeatureScript is used to define the socket sets and layouts, and make almost all the layout sizing/spacing calculations automatic.
Filament: PETG (Prusament PETG Ultramarine Blue)
Layer Height: 0.25 first, 0.30 thereafter
Infill: 15%