Panasonic RQ-J55 Belt Clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Custom designed belt clip for Panasonic RQ-J55 Cassette Walkman
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 62
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a belt clip I designed for my Panasonic RQ-J55 Cassette walkman! This thing is a Walkman, but doesn't include a belt clip! It was designed for use with a strap to hang from your body, but the one I bought did not come with the strap. So, I made a clip!
Clip is designed to use the top 4 factory screws that hold the player together.
I printed this in PLA+, but regular PLA should do just fine, this thing is plenty strong.
Recommended to print on its side! I rotated it by 90 degrees on the Y axis! I used my default printer settings with 0.2mm layer height, 15% infill. I made sure to print it using a wide brim, and tree supports made for easy cleanup post-print.