Manual Color Change CoreOne/+
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Printer profile for manual color changes on the CoreOne/+. No AMS/MMU needed
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 76
- Wydruki
- 0
- Wyświetlenia
- 424
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Open Community License v1
I had some trouble getting multicolor printing on the CoreOne. Sure, I could have changed colors layer by layer, but some models require a color change within a single layer.
I used to have an MMU, so I knew roughly how everything was supposed to work. Nevertheless, there were several failed attempts.
To save you from these failed attempts and clogged extruders, I'm sharing my printer profile with you.
With this profile, YOU are the MMU. It should work without any further adjustments. Open as project, save printer profile, slice and try it out. When tried enough, you should abort the testprint ;-) Keep in mind that you need a wipe tower, it is used as a prime tower.
🙏 Thank you
Thanks so much for your downloads, likes, makes, and recommendations – they help make the models more visible and reach more people.
A lot of effort and care goes into creating these models, which I offer for free.
If you’d like to support my work, even a small donation helps me continue developing new designs and improving existing ones. ❤
http://www.paypal.me/saphir85 or join my club.