1 / 10
TPU/PLA Bullets (8x30mm) without MMU/glue!  | REMIX for Glock 19 "working toy gun" G19 — zdjęcie 1
1 / 10

TPU/PLA Bullets (8x30mm) without MMU/glue! | REMIX for Glock 19 "working toy gun" G19

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

TPU/PLA Bullets | 4 DIFFERENT VERSIONS of the bullet (8x30mm) | Printed without MMU! No Glue needed!

Ocena
5 / 5
Polubienia
96
Pobrania
180
Wydruki
2
Wyświetlenia
1595
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Building Toys
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

TPU/PLA Bullets (8x30mm) without MMU/glue! | REMIX for Glock 19 "working toy gun" G19

note: There are 4 DIFFERENT VERSIONS of the bullet (8x30mm), see in the picture below! Select the preferred size of the tip & bullet to match them!

Then just print the tips in TPU (used 98A, without supports) and the shells in PLA/PETG/whatever. Print the shells as light as possible! Then push the tips with some pliers and a little twist into the shells. Done, have fun! :)

Tagi