PSP 2000/3000/E1000 Dummy DC-In Jack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Blank replacement for the DC jack in the last three generations of PSP, intended to fill the space neatly in USB-C mods.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 259
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
I wanted a clean solution to fill in the hole left by removing the DC-In jack in my PSP Street after doing a USB-C mod, so I made a quick model that just screws in where the original port went. Should also fit PSP-2000 and 3000 models respectively, as they use the same jack.
I personally had the most luck printing with the circular portion facing downwards and using supports, realistically any orientation should work as long as your printer handles overhangs well - I used polycarb as it's what I had loaded, so tweak appropriately.