Planck Keyboard Rev.4 - Massdrop edition Case Cyberdeck
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
2 case styles for Planck Keyboard with design files.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 224
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
Planck Keyboard Rev.4 - Massdrop edition case. Includes stl, step and fusion files. Modify as you see fit :-)
You'll need 5ea. 2x16mm screws and nuts. I didn't use locknuts because the recess is really deep and I was afraid they'd spin in the holes and not tighten up. In hindsite, the nut recess is so tight I bet they would work, but locknuts are unnecessary anyway.
Notes:
The nuts are a tight fit - use the usual heat insert tricks if you want. We just pulled them up with a longer screw.
See the difference in the 2 versions - one is plain and the other has somewhat decorative but also stabilizing protrusions (if used with a screen attached).
We glued on a ball joint camera attachment for the screen.
Printed great in PLA. Increased all walls to support the glued on ball joint. Used 40% infill just to add weight.
DO THIS - change your slicer to 'print external perimeters first' otherwise it might make a slight layer bulge on the outside at the z elevation of the inside platform.
Hardware for screen mount depends on your particular setup, but this should get you started:
cord https://www.amazon.com/dp/B0D25V64LW?ref=ppx_yo2ov_dt_b_fed_asin_title
ram mounts, var https://www.amazon.com/dp/B0D87KZXFF?ref=ppx_yo2ov_dt_b_fed_asin_title
nato rail clamp SmallRig NATO Clamp, Quick Release Clamp with 1/4" 3/8" M2.5 Thread for Cold Shoe Monitor Support Camera Cage - 1973 https://www.amazon.com/dp/B072B91DWG?ref=ppx_yo2ov_dt_b_fed_asin_title
70mm nato rail https://www.amazon.com/dp/B07R3SR675?ref=ppx_yo2ov_dt_b_fed_asin_title