BYOIC (Build Your Own Infinity Cube)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mix and match cubes and hinges to build your own infinity cube
- Ocena
- 5 / 5
- Polubienia
- 61
- Pobrania
- 267
- Wydruki
- 6
- Wyświetlenia
- 2626
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Share Alike
Mix and match holey and solid cubes to build your own infinity cube.
All components are from my previous infinity cube model, with new compliant hinges to stick everything together.
To build it, select your size (20, 30 or 50mm) and print four left and four right cubes as well as eight hinges. The hinges pop into place and can be removed if necessary. Watch you get the cube orientations correct or your cubes won't spin – more of a finity cube as it were.
When slicing the holey cube, be aware that PrusaSlicer doesn't get the bridging orientation correct resulting in some cleanup after the print. If you're curious, there's a thread with pictures about it on github.