Resident Evil Grenade round case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Will you take the Grenade Rounds? >Yes No
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 259
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Costume Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
A call back to the Cassic resident evil grenade rounds case.
depending on your printer and tolorances the lid might be a bit too tight... I reccomend just a bit of sanding.
I printed it both out of PETG and ABS on the centuri carbon and my qidi plus 4
I reccomend 3 walls 15% infill with the inner outer inner , and thicken up the bottom layer (1mm) use consentric for the bottom layer for an interesting look.
the handle was desinged backwards so the good side prints down A95 TPU should be more than strong enough .
If you have a tool changer you can print the inside in TPU maybe like .5mm to dampen the sounds of things in it , as I have no tool changers this isn't something I have tried. From what I have read ABS and TPU bond well when printed. PETG and TPU would be my go to for a lining like that.
I used Qidi's metalic ABS sliver and midnight green for that look.