[Parametric] Sliding-End Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A box with one end that slides on and another that allows for a finger to push the contents out through the sliding end.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 30
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Standard Digital File License
This box has one end that slides on and another end that allows for a finger to push the contents out through the sliding end. It was created to hold another box that doesn't have a lid but I imagine there are many uses for it. You can disable the push end to use the box just as a regular box.
STL, SCAD, and 3mf files provided. No supports necessary for printing.
The model is parametric, so you can adjust it to fit your needs using OpenSCAD or a similar program:
length (147mm default): Longest interior dimension.
width (47mm default): Shortest interior dimension.
height (37mm default): Interior height.
push_hole (25mm default): Length/width of the access hole. Set to 0 to disable.
design_height (24mm default): The placement of the side design
If you are printing in a translucent filament, set the infill to 0%. Make sure to print on end.
The 3mf file provided is set up with the above defaults for translucent PETG (0% Infill).
Don't leave outside or in the car if printing in PLA.
All models uploaded to Printables are uploaded with a free Personal Use License. Commercial Use Licenses are available to Supporters/Distributors on Patreon.