Celestron Nexstar 130SLT Wall Hanger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a pair of hooks designed to let you get your precious telescope off the floor, and safely mounted to the call
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 47
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a pair of "J" hooks designed to let you get your precious telescope off the floor, and safely mounted to the call. It also includes 2 spacers that get the hooks off the wall so the telescope hangs better. You'll need four 3.5" or longer screws if you're mounting to the studs, or high quality hollow wall anchors.
I recommend using PETG for extra strength, but PLA might work as well.
The way I printed them the hooks used 112 grams of PETG each, and the spacer used an additional 32.3grams each.
The spacer as a small bump that just helps ensure alignment between the 2 pices