Raspberry Pi Pico 2 W/H parametric enclosure / case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Parametric Raspberry Pi Pico enclosure / case with expansion support for peripherals.
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 168
- Wydruki
- 2
- Wyświetlenia
- 1143
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
End of Support Notice
This project has evolved!
I am no longer updating this specific version. I’ve incorporated many improvements and fixes into a new model, which you can find here:
Overview
Parametric Raspberry Pi Pico case with expansion support for peripherals. This description is for default configuration - Raspberry Pi Pico standalone.
Designed in FreeCAD, source files included.
Model parametrization
This model is based on previous version of the model below, where the parametrization has been improved. However the description is still applicable, but you need to set parameters to spreadsheet PAR instead of spreadsheets mentioned in original model.
Print Settings
The 3MF file created in OrcaSlicer is included.
Material: PLA
Layer Height: 0.2 mm
Perimeters: 4
Top/Bottom Layers: 4
Infill: Grid 20%
Supports: Yes
Bill of Materials (BOM)
1pc ... Raspberry Pi Pico
4pcs ... 1,4x4 BN 13577 screw for thermoplastic
4pcs ... 2,6x6 BN 13577 screw for thermoplastic
Assembly Instructions
Place BOOTSEL button
Mount Raspberry Pi
Mount cover
Updates
2026-01-13 First release
Disclaimer
The creator is not liable for any damage to your hardware or any unintended results caused by the use of this project, its code, or its documentation. Use at your own risk.