Scooter Handlebar Extender for Sencor / E9
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Scooter Handlebar Extender for Sencor Scooter One 2020 / Maxwheel E9.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 42
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Public Domain
Scooter handlebar extension for Sencor Scooter One 2020. This electric scooter is a rebrand of (also compatible) Maxwheel E9 (Pro). I tested available extensions for similarly looking handlebars of M365 scooter but they didn't fit. So this is my version, tailored for this scooter.
My primary use for these extensions is a socket for rear view mirror. One of the extensions can be used with this $2 mirror. I removed the expansion nut and super glued the mirror to the extension.
The extension extends the handlebar on each side by 32 mm - this is tailored for 135 mm wide grips (the original ones are about 115 mm). Again, I have used some $5 grips with lock rings on all ends to secure the extensions.
Printing
Printing slow and with high quality PETG seems to provide good enough strength along the layers so I decided to keep the models upright. I wasn't even able to break PLA+ prototypes in hand.