3D Sets Mogster Overland Towing Hitch Bumper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Allows any truck with the Overland rear bumper to tow 3D Sets trailers
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 109
- Wydruki
- 4
- Wyświetlenia
- 633
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
The 3D Sets Mogster has been my favourite RC vehicle from them so far, with a variety of layouts, a Fusion SE as a standard motor choice, great performance with portals, and a super detailed body with fine details it's been all I wanted except for one thing: it didn't come with a tow hitch. Well, I got tired of waiting, and decided to design my own.
The main changes are a modified tube bumper to accommodate the different hole pattern of the 3D Sets hitch, a gusset system to support the hitch, with the gusset utilizing the same holes as the winch. Unfortunately, this does mean the winch is not compatible.
Installation uses only two additional M3x16 screws from the original to secure the hitch to the bumper and gussets
V1.1: Added 1mm increase in thickness to the Winch Tube Frame Towing version to allow the clip to clear the 3DSets license plate. Also sized the trailer hitch locks down to 97% to make removal easier