Ant repellent with PET, Ameisen Vertreiber mit PET
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
4,39 € – 5,37 € netto (bez VAT)
Dla pliku: Bottle_Wings_0.2mm_PLA_MK3S_5h31m.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 4,88 € netto (środek widełek).
- Masa podana przez autora
- 48 g
- Czas druku podany przez autora
- 5,51 godz.
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
For anyone who has ants in their lawn and wants to get rid of them without killing them. Vertreibt Ameisen.
- Ocena
- 4,5 / 5
- Polubienia
- 25
- Pobrania
- 80
- Wydruki
- 2
- Wyświetlenia
- 1192
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
For anyone who has ants in their lawn and wants to get rid of them without killing them.
The wings are twisted onto a PET bottle.
Then stick a metal stick as deep as possible into the lawn.
Turn the PET bottle upside down on the rod - done.
The wind turns the bottle on the stick. Ants don't like that sound. They like it quiet.
The small photo is with a prototype, the original is far larger and requires little wind.
I added a maximum version for very little wind. It is 20mm higher and 20mm more in diameter.
Printed as a draft, it “only” takes 5:25 hours.
Print settings:
Support on built plate only
Brim: Yes
Infill 5-15%
Für jeden, der Ameisen in seinem Rasen hat und diese loswerden möchte, ohne sie zu töten.
Die Flügel werden auf eine PET Flasche gedreht.
Dann einen Metallstab möglichst tief in den Rasen stecken.
Die PET Flasche umgedreht auf den Stab - fertig.
Durch den Wind dreht sich die Flasche auf dem Stab. Die dadurch verursachten Geräusche vertreiben die Ameisen, die es gern ruhig haben.
Das kleine Foto ist mit einem Prototypen, das Original ist weitaus größer und benötigt nur wenig Wind.
Ich habe noch eine Maximalversion für sehr wenig Wind hinzugefügt. Sie ist 20mm höher und 20mm mehr im Durchmesser.
Als Draft gedruckt, dauert sie „nur“ 5:25 Stunden.
Druckeinstellungen:
Support on built plate only
Brim: Yes
Infill 5-15%