WOWSTICK 1F+ Caddy
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
WOWSTICK 1F+ Carousel Caddy that holds most bits, driver, and charge cable.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 359
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
I designed this WOWSTICK 1F+ caddy to make bit changes quicker. It includes a holder for the USB charge cable and a spot for a Wiha micro bit extension. The screwdriver can be stored with or without the longest bit still installed. Micro bits have a 4mm shank.
A very finely built screwdriver that comes with a good bit assortment and is beautifully packaged. Suitable for small electronics work.
You can make it with or without the carousel base. The base accepts a common 6200 bearing. I designed it so that all clearances are ideal…not too tight, not too loose. I included some test blocks if you want to try printing them before committing to printing the whole piece. You can play with scaling in your slicer if you choose but you shouldn't need to do that. I have added registration marks on the bottom to add ¼" x 20mm rubber strips attached with thin double side tape.