1 / 2
Philips MiniVac spare part — zdjęcie 1
1 / 2

Philips MiniVac spare part

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replacement part for Philips MiniVac, modeled from photos. Must be printed in TPU due to moving parts.

Ocena
0 / 5
Polubienia
1
Pobrania
6
Wydruki
0
Wyświetlenia
33
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Public Domain

I needed a replacement part for a Philips MiniVac cordless handheld vacuum cleaner, but since it is an older model, I couldn’t find the original spare part anywhere.

To solve this, I recreated the part by modeling it based on reference photos and 3D printed it.
I’m sharing the model here in case it helps someone else with the same issue.

⚠ Important:
This part is installed in an area with moving components, so it must be printed in TPU (flexible filament). Printing it in PLA or PETG is not recommended.

Tagi