Meshtastic Heltec V3 and V4 with Battery Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Meshtastic Heltec V3 and V4 with 5k OR 10k mAh Battery Holder for use with a junction box.
- Ocena
- 5 / 5
- Polubienia
- 30
- Pobrania
- 171
- Wydruki
- 0
- Wyświetlenia
- 1485
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
Meshtastic Heltec V3 & V4 with 5000 OR 10,000 mAh Battery Holder – Junction Box Ready
This enclosure setup is designed to house Heltec LoRa V3 or V4 Meshtastic nodes along with a 5000 mAh LiPo battery, creating a compact, durable, and field-deployable mesh node suitable for indoor or outdoor use when installed in a junction box.
Power System
5000 mAh LiPo battery holder securely mounts inside the enclosure
5000 mAh link : https://a.co/d/gOY2nM8
10000 mAh LiPo battery holder securely mounts inside the second enclosure
10000 mAh link : https://a.co/d/an8frrV
Junction Box Use
Designed for installation inside a compact electrical junction box
Protects electronics from dust, debris, and incidental contact
Allows clean routing for:
External LoRa antenna
USB charging/programming access
Optional GPS or solar leads
Internal layout keeps the board and battery secure and prevents movement or cable strain
Mounting dimensions for hardware are 50mm x 100mm
Used M3 brass inserts pressed into the junction box internal mounting holes.
Junction Box Link : https://a.co/d/hh4XuXd