TILTIE – Minimal Balancing Game (No Supports, One STL)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A minimal balancing game where identical blocks hide a single stable orientation. Easy to print, hard to master.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 103
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Puzzles & Brain-teasers
- Licencja
- Creative Commons — Attribution — Noncommercial
TILTIE is a minimal balancing game made of identical blocks.
Each block looks the same, but only one orientation is stable.
Rotate, stack, and try to keep the tower standing for as long as possible.
The challenge comes entirely from geometry — no hidden weights, no moving parts, no assembly.
This design is optimized for home 3D printers:
- Single STL file
- No supports
- No assembly
- Fast and reliable prints
How to play:
1. Place one block on a flat surface
2. Stack another block on top
3. Rotate each block to find the correct orientation
4. If the tower falls, the game is over
The higher the tower, the harder it gets.
Print recommendations:
- Material: PLA
- Layer height: 0.2 mm
- Infill: 10–15%
- Supports: No
- Brim: Optional
Tip: Print 6–8 blocks for the best gameplay experience.