Solarpunk Playset Laser Cutter Pieces (turbine blade and water wheel)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This .zip contains the two components which can be made using a laser cutter from a solarpunk playset project I made
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 111
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
Most of this project was made by hand out of wood scraps and a few metal parts (such as eye-loop fasteners and stainless steel metal rod I purchased. I don't have good notes for any of those parts.
For the parts I made using a laser cutter, I'm happy to share the files. These are .png and .svg files which should be easy enough to use in your laser cutter software. They're nothing fancy but they should help you avoid reinventing the wheel. For the water wheel I recommending assembling the wood parts into two sections split so you can add the plexiglass panel, painting them, then adding the beads and plexiglass. Make sure to mask the surfaces you plan to glue together when painting them.
You can see the full build here:
https://www.reddit.com/r/solarpunk/comments/1pnfacy/babys_first_solarpunk_a_monorail_playset_i_made/