O Gauge Torpedo Car Prototype
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A test of an O gauge torpedo car I designed for 3D printing. There is still work to be done on it, but its a start
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 239
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles & Machines
- Licencja
- Creative Commons — Attribution
This is based on small torpedo cars used in the steel industry to cary molten metal. The one I have designed is a work in progress and still has some improvements to be made, but they are a ways off. For this Project, use
The main thing I need to improve is the 3D printed trucks. If you'd like to use trucks that can actually couple to other trains, these ones by Atlas work great) https://mrmuffinstrains.com/products/atlas-66040-3rl-heavyweight-passenger-car-trucks-3-rail
You will also need two M3x12 screws to attach the truck to the BaseForTruck part. Some can be found here: https://a.co/d/c7vkWk9
If you'd like to use the 3D printed trucks, note that they don't have a coupler. Just insert 3 wheel sets (I used old Lionel ones and a bit of white lithium grease).
These trucks are attached using the same BaseForTruck part, but instead use M4x12 screws to thread into the plastic of the ThreeWheelTruckAssem part. These can be found here: https://a.co/d/c7vkWk9.
Please reach out with any questions or feedback!