Love Llamas - Kissing Alpacas
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Affectionate Alpacas in love
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 50
- Wydruki
- 1
- Wyświetlenia
- 204
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is not a llama... It is an alpaca. Apologies for the deceit. Please forgive me.
Printing Instructions:
This model utilizes 6x3mm magnets. Make sure you set the magnets in the llama with the correct polarity so mouths are attracted to each other.
NOTE: If printing with a steel nozzle, the magnet will get attracted to it and may not work. You'll want to try using a brass nozzle to embed magnets into the model.
The 3mf file provided was created using Prusa slicer for the Prusa XL and includes 3 versions of the llama with hearts painted in several spots.
Layer height: 0.2mm
Add pause to layer 532 to insert magnet (Check polarity before inserting)
Thank you for your time and consideration on this matter
For those who have joined my club at the “Obsessor” tier or have subscribed to my commercial membership on Patreon, prints of this model can be used for commercial purposes.
Feel free to join my discord for additional support, questions, or suggestions!