Beeline Moto II [BLACK] - Casing + Inlay
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This model consists of a casing for the Beeline Moto II [BLACK]. A rugged casing + Inlay.
- Ocena
- 5 / 5
- Polubienia
- 2
- Pobrania
- 19
- Wydruki
- 1
- Wyświetlenia
- 133
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Moto BeeLine II - Casing + Inlay
For the BeeLine II (moto navigation) I created this Rugged Box with TPU inlay.
For the box design I used the model of @Whity (so all the credits to this maker for that aspect!).
For the inlay I created a fitting TPU inlay.
Please be aware this casing fits the Beeline Moto II BLACK version only.
Top, Bottom + Latch are assembled by using 3x M3x0.5 with a length 30mm (Type: Hexagon Socket Head Cap Screws [DIN 912] )
Materials
Rugged box + Latch: PLA+ (eSUN)
Inlay + Seal: TPU shore 95 (GeeeTech)
Print settings
I applied the following settings for the prints.
Layer height: PLA+ 0.15mm, TPU 0.2mm
Infill: PLA 15%, TPU 15%
Support: no support needed! = no waste ;)
Note: Please consider other settings incase you think this helps you or the design in any way.
Final thoughts
Please let me know if you print this model and what you think.
Any feedback is welcome.
Have fun.
P.S. Also check my other creations