4x4 Weighted Cube Stacking/Balancing Game
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple block stacking game which takes advantage of the infill density parameter to create pieces with varying weights
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 161
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Puzzles & Brain-teasers
- Licencja
- Creative Commons — Attribution — Noncommercial
This game is designed to be played with any number of players. The goal is to use the cube pieces to build up a tower on the board, one piece at a time, without it crashing down. You can try stacking yourself in any order to make the tower as tall as possible, or you can take turns drawing random pieces and master the act of balance!
RECOMMENDED PRINT SETTINGS
Board: print however you want, I had best luck printing it flat side down with normal supports to help with bridging. Quick tip regarding the board, sanding the bottom can make it wobble a bit more smoothly.
Cube Pieces:
Light Pieces
Wall loops: 2
Infill density: 10%
Layer height: 0.2mm
Medium Pieces
Wall loops: 2
Infill density: 48%
Layer height: 0.2mm
Heavy Pieces
Wall loops: 2
Infill density: 85%
Layer height: 0.2mm
All pieces have their own design with a small weight indicator, so that it can be easier to distinguish the pieces if you are printing with just 1 color filament. If you intend to print with multiple colors and don't want the weight bar icons on them, I have linked the blank file as well.