1 / 1
9mm no protrusion monolith gantry modified for SV08max. — zdjęcie 1

9mm no protrusion monolith gantry modified for SV08max.

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

My clumsy modification of Monolith 9mm AWD printed corners for SV08Max

Ocena
0 / 5
Polubienia
12
Pobrania
33
Wydruki
2
Wyświetlenia
865
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

On top of the BOM you must generate from the monolith github for printed corners, 9mm, no protrusion parts you'll need some extra stuff.  I currently don't have time for a comprehensive BOM but you'll need extra 16mm m5 BHCS, 8x 50mm m5 BHCS, extra roll in M5 inserts, 60 m3 roll in inserts, 60 m3 8mm SHCS (these are to move the sovol rails onto extrusion) some long m3 SHCS (25 and 40 I think?) 4x 700mm 2020 extrusion (637mm is what I had for the Y axis pieces, didn't measure the others, but they are shorter) 6m of 9mm belt. This is likely a project for people who already have a good stash of this stuff lying around since there isn't yet a guide.  

All credit to CloakedWayne and the people they worked with.  

Attribution-NonCommercial-ShareAlike 4.0 International

https://creativecommons.org/licenses/by-nc-sa/4.0/

If I didn't do this right let me know.

Tagi